Ducati hipermotard 2016 Owner's Manual page 117

PIN activation
This function allows activating your PIN CODE to be
used to start the vehicle in case of Immobilizer
System malfunction.
To display the function, enter the setting menu and
access the "PIN" page.
Note
If "MODIFY PIN CODE" appears when
accessing this function, this means that there is
already a stored PIN and therefore the function is
already active.
When entering the function, the display shows the
message "INSERT NEW PIN" followed by four dashes
"- - - -". Now enter a 4 digit code.
Entering the code:
- Each time button (2) is pressed, the highlighted
number increases from 0 to 9 and then goes back
to 0; to confirm the desired number press button
(4);
- Repeat the procedure until entering the fourth
digit.
- Press button (4) again to confirm.
After entering the code, the "MEMORY" item will be
highlighted automatically.
To memorize the entered PIN, keep button (4)
pressed for 3 seconds.
"MEMORIZED" will be displayed to confirm that the
PIN was correctly memorized.
From this moment, "MODIFY PIN CODE" will be
displayed when accessing the "PIN CODE" function
and the PIN can be changed again.
115