Table of Contents
Advertisement
Reloading a Ribbon Cassette ------------------------------------------------------------------
To reload your ribbon cassette, remove the ribbon cassette
from the printer and follow these steps:
1. Locate the end of the cassette with the two latches.
Locate the International Symbols for opening and closing.
n
(
the cassette is unlocked (open).
2. Rotate both latches until they snap into the unlocked
3. Lift off the half of the cassette without the latches and set
) indicates the cassette is locked (closed). (
position.
it aside. (Figure 36.)
Ridged End of
Take-up Reel
Latch
Gear
Chapter 2. Loading Supplies
Figure 36
) indicates
Ribbon
Spool
Foam
Washer
Latch
2-15
Advertisement
Table of Contents
