Table of Contents
Advertisement
9476 Assembly and Setup Instructions
3. Insert the power cord (packaged with the battery charger)
4. Insert the battery cable into the battery socket on the back
5. Make sure the voltage selector switch on the back of the
6. Place the charger on the cabinet floor.
1-20
into the power socket on the back of the charger. (Figure
14.)
Battery
Socket
Battery
Cable
Power
Cord
of the charger. (Figure 14.) The cable is keyed.
charger is set correctly (115V in U.S.).
Voltage
Selector
Power
Socket
Figure 14
Advertisement
Table of Contents
