9476 Assembly and Setup Instructions
2. Open the Station's cabinet. Press the chrome handle
3. Position the cord bracket over the mounting holes on the
Step 4: Attaching Optional Items----------------------------------------------------------
This section describes how to attach the optional drop shelf,
push handle, and data entry terminal cradle. Each optional
item and necessary mounting hardware is packaged
individually. These are optional items; if you did not order
them, skip to step 5.
1-8
insert into the cabinet door and fasten it with two 5/8"
phillips screws. (Figure 4.)
lower shelf 's edge shown. Fasten the bracket with two
1/2" slotted screws and 8-32 nuts/lockwashers. (Figure 4.)
Handle
Insert
Figure 4
Cord
Bracket