Attach The Drop Shelf - Paxar Mobile Printing Station Monarch 9476 Assembly And Setup Instructions

9476 Assembly and Setup Instructions

Attach the Drop Shelf

1. Remove the following items from their packaging:
2. Attach the support brace to the Station's corner supports
Do not tighten the screws completely.
n
1-10
(1) support brace
(1) metal rod
(1) drop shelf
(2) end caps
(2) 1/4"-20 x 1/2" phillips screws
(2) plastic washers
on either the front or the rear of the Station using two 1/2"
phillips screws. The open side of the support brace must
face down. (Figure 6.)
Figure 6
Support
Brace
Corner
Support