Attach The Push Handle - Paxar Mobile Printing Station Monarch 9476 Assembly And Setup Instructions

Attach the Push Handle

1. Remove the following items from their packaging:
2. Attach the push handle to the front or rear of the Station
using four 3/4" hex bolts, 1/4"-20 washers, and 1/4"-20
nuts as shown. (Figure 5.)
Push
Handle
(1) push handle
(4) 1/4"-20 x 3/4" hex bolts
(4) 1/4"-20 nuts
(4) 1/4"-20 washers
Chapter 1. Assembling the Station
Figure 5
1-9