Table of Contents
Advertisement
6. Fan all four sides of the supply stack and straighten any
curved or bent corners. This will prevent supplies from
sticking together and causing feed jams.
7. Place the supply stack on the bottom shelf, directly
beneath one of the Station's fan-fold slots. The supply's
liner side should face up, so the arrow next to the black
mark points toward the printer. Place the magnetic supply
brackets at the opposite corners of the stack as shown.
(Figure 26.)
Supply
Strip
Fan-Fold
Slot
Magnetic Supply
Bracket
8. Lift the supply strip up through the Station's fan-fold slot.
(Figure 26.)
Chapter 2. Loading Supplies
Figure 26
2-5
Advertisement
Table of Contents
