Table of Contents
Advertisement
9476 Assembly and Setup Instructions
9. Feed the supply's leading edge into the printer's fan-fold
10. Adjust the supply guides to the edges of the supply and
2-6
slot. The black mark on the supply must be facing up; if it
is not, flip the supply stack over. Make sure the arrow
printed on the back of the supply points toward the printer.
Center the supply in the printer by lining up the black mark
within the centering notch. (Figure 27.)
turn the latches to lock the supply guides in place.
(Figure 27.)
Fan-Fold
Slot
Arrow
Black
Mark
Centering
Notch
Latch
Figure 27
Supply
Guide
Advertisement
Table of Contents
