4. Slide the latches on the back of the printer toward the
5. Continue to push the printhead assembly toward the rear
Loading Fan-Fold Supplies ----------------------------------------------------------------------
To load fan-fold supplies into your printer, follow the steps
below.
When using fan-fold labels, load for non-peel mode only.
n
Non-peel mode feeds the labels through the printer without
peeling them from the backing paper. The printer does not
print fan-fold labels in peel mode.
1. Open the printer.
center. (Figure 24.)
of the printer until it opens completely.
Latches
Chapter 2. Loading Supplies
Figure 24
2-3