Attach The Printers - Paxar Mobile Printing Station Monarch 9476 Assembly And Setup Instructions

2. Position the printer bracket on the top shelf of the Station,
facing one of the Station's fan-fold slots as shown. Align
the holes in the printer bracket with the holes in the shelf
and fasten with 8mm screws and M4 nuts. (Figure 16.)
All printer brackets must face the same direction.
n

Attach the Printers

For each printer you install, follow these steps:
See your 9490 Operator's Handbook for more information on
n
attaching the power pack and communication cable.
Chapter 1. Assembling the Station
Figure 16
Printer
Bracket
Fan-Fold
Slot
1-23