Step 2: Adjusting The Station's Height - Paxar Mobile Printing Station Monarch 9476 Assembly And Setup Instructions

9476 Assembly and Setup Instructions

Step 2: Adjusting the Station's Height--------------------------------------------------

1. Remove the following items from their packaging:
2. Turn the Station right side up.
3. Open the Station's cabinet and remove the packaging from
4. You might need another person's help with this step. Lift
1-6
(4) 1/4"-20 x 3/4" bolts (black)
(4) 1/4"-20 wing nuts (black)
(1) plastic cable-tube clamp (may already be attached
to the cable tube)
around the bottom of the cable tube and from the cables.
the top shelf to the second-highest height adjustment.
Make sure the cables inside the cable tube feed freely as
you lift the top shelf. Insert bolts into the holes in all four
legs and fasten them with wing nuts as shown. (Figure 3.)
Cable
Tube
Cable
Clamp
Figure 3