Thermal Dynamics PAK 200 Operating Manual page 51

Status Code Key (cond)
Status Message
Code
CANBUS Failure to Acknowledge
5-1
fault.
CANBUS Off due to
5-2
excessive data errors;
CANBUS data error warning.
5-3
Errors increasing, will soon fault.
5-4 CCM Message not sent
6-1 CCM Analog Voltage Error
6-2 CCM ADC or DAC error
Manual 0-5057
Cause/Remedy
Does not apply to PAK200, if displayed CCM defective.
Does not apply to PAK200, if displayed CCM defective.
Does not apply to PAK200, if displayed CCM defective.
Does not apply to PAK200, if displayed CCM defective.
Replace CCM
Replace CCM
4-9
PAK 200
OP-