Table of Contents
Advertisement
OptiOns
Selecting a lever pattern
Selecting a lever pattern
The operating pattern of the left and right operating levers can be changed.
Before starting the engine, check the selector to see which operating pattern the left
and right operating levers are set.
Switching the lever pattern
(A) : ISO pattern
(G) : G pattern
1. Park the machine on a flat and rigid
ground, and stop the engine.
2. Open the maintenance cover.
3. Loosen the wing bolt (1).
4. Turn the selector valve lever (2) to switch
the pattern.
5. Tighten the wing bolt (1) and fasten the
lever (2) in place.
6. Close the maintenance cover.
7. Confirm the lever pattern.
8-5
Advertisement
Table of Contents
