OPTIONS
Switching the Lever Pattern
The operating pattern of the left and right operating levers can be changed.
Before starting the engine, check the selector to see which operating pattern the left
and right operating levers are set for.
A
ISO
G
JCB
Switching the Lever Pattern
(A) : ISO pattern
(G) : JCB pattern
WARNING
1. Park the machine in a safe place and turn
off the engine.
2. Fully open the cab door and fix it in place.
3. Remove the cover (1).
4. Loosen the wing bolt (2).
5. Turn the selector valve lever (3) and switch
the pattern.
6. Tighten the wing bolt (2) and fasten the
lever (3) in place.
7. Close the cover (1).
8. Check the lever pattern.
198
C4L004