Switching The Lever Pattern - Takeuchi TB125 Operator's Manual

OPTIONS

Switching the Lever Pattern

The operating pattern of the left and right operating levers can be changed.
Before starting the engine, check the selector to see which operating pattern the left
and right operating levers are set for.
A
ISO
G
JCB
Switching the Lever Pattern
2 3
A
G
(A) : ISO pattern
(G) : JCB pattern
WARNING
1. Park the machine in a safe place and turn
1
off the engine.
2. Fully open the cab door and fix it in place.
3. Lift up the floor mat at the cab entrance.
4. Open the cover (1).
5. Loosen the wing bolt (2).
6. Turn the selector valve lever (3) and switch
the pattern.
L3L0021
7. Tighten the wing bolt (2) and fasten the
lever (3) in place.
8. Close the cover (1) and set the floor mat
back in place.
9. Check the lever pattern.
199
C4L004