Information List - Siemens SIPROTEC 7SD80 Manual

Functions
2.11 Automatic Reclosure Function 79 (Optional)
2.11.4

Information List

No. Information
127 79 ON/OFF
2701 >79 ON
2702 >79 OFF
2703 >BLOCK 79
2711 >79 Start
2716 >79 TRIP 3p
2727 >79 RemoteClose
2738 >BLOCK 3pole AR
2739 >BLK 1phase AR
2740 >BLK 2phase AR
2741 >BLK 3phase AR
2742 >BLK 1.AR-cycle
2743 >BLK 2.AR-cycle
2746 >Trip for AR
2752 >Pickup 3ph AR
2781 79 OFF
2782 79 ON
2783 79 is blocked
2784 79 not ready
2787 CB not ready
2788 79 T-CBreadyExp
2796 79 on/off BI
2801 79 in progress
2809 79 T-Start Exp
2810 79 TdeadMax Exp
2818 79 Evolving Flt
2821 79 Td. evol.Flt
2840 79 Tdead 3pTrip
2843 79 Tdead 3pFlt
2844 79 1stCyc. run.
2845 79 2ndCyc. run.
2851 79 Close
2853 79 Close1.Cyc3p
2854 79 Close 2.Cyc
2861 79 T-Recl. run.
2862 79 Successful
2871 79 TRIP 3pole
2889 79 1.CycZoneRel
2890 79 2.CycZoneRel
2894 79 Remote Close
154
Type of In-
formation
IntSP 79 ON/OFF (via system port)
SP >79 ON
SP >79 OFF
SP >BLOCK 79
SP >79 External start of internal A/R
SP >79: External 3pole trip for AR start
SP >79: Remote Close signal
SP >79: Block 3pole AR-cycle
SP >79: Block 1phase-fault AR-cycle
SP >79: Block 2phase-fault AR-cycle
SP >79: Block 3phase-fault AR-cycle
SP >79: Block 1st AR-cycle
SP >79: Block 2nd AR-cycle
SP >79: External Trip for AR start
SP >79: External pickup 3phase for AR start
OUT 79: Auto recloser is switched OFF
IntSP 79: Auto recloser is switched ON
OUT 79: Auto recloser is blocked
OUT 79: Auto recloser is not ready
OUT 79: Circuit breaker 1 not ready
OUT 79: CB ready monitoring window expired
IntSP 79: Auto recloser ON/OFF via BI
OUT 79 - in progress
OUT 79: Start-signal monitoring time expired
OUT 79: Maximum dead time expired
OUT 79: Evolving fault recognition
OUT 79 dead time after evolving fault
OUT 79 dead time after 3pole trip running
OUT 79 dead time after 3phase fault running
OUT 79 1st cycle running
OUT 79 2nd cycle running
OUT 79 - Close command
OUT 79: Close command after 3pole, 1st cycle
OUT 79: Close command 2nd cycle (and higher)
OUT 79: Reclaim time is running
OUT 79 - cycle successful
OUT 79: TRIP command 3pole
OUT 79 1st cycle zone extension release
OUT 79 2nd cycle zone extension release
OUT 79 Remote close signal send
Comments
SIPROTEC, 7SD80, Manual
E50417-G1140-C474-A1, Release date 09.2011