Information List - Siemens SIPROTEC 7UM62 Manual

2.2.3

Information List

No. Information
- Reset LED
- Test mode
- DataStop
- UnlockDT
- >Light on
- SynchClock
- HWTestMod
- Distur.CFC
1 Not configured
2 Non Existent
3 >Time Synch
5 >Reset LED
15 >Test mode
16 >DataStop
51 Device OK
52 ProtActive
55 Reset Device
56 Initial Start
67 Resume
69 DayLightSavTime
70 Settings Calc.
71 Settings Check
72 Level-2 change
73 Local change
125 Chatter ON
301 Pow.Sys.Flt.
302 Fault Event
320 Warn Mem. Data
321 Warn Mem. Para.
322 Warn Mem. Oper.
323 Warn Mem. New
545 PU Time
546 TRIP Time
SIPROTEC, 7UM62, Manual
C53000-G1176-C149-7, Release date 03.2010
Type of In-
formation
IntSP Reset LED
IntSP Test mode
IntSP Stop data transmission
IntSP Unlock data transmission via BI
SP >Back Light on
IntSP_Ev Clock Synchronization
IntSP Hardware Test Mode
OUT Disturbance CFC
SP No Function configured
SP Function Not Available
SP_Ev >Synchronize Internal Real Time Clock
SP >Reset LED
SP >Test mode
SP >Stop data transmission
OUT Device is Operational and Protecting
IntSP At Least 1 Protection Funct. is Active
OUT Reset Device
OUT Initial Start of Device
OUT Resume
OUT Daylight Saving Time
OUT Setting calculation is running
OUT Settings Check
OUT Level-2 change
OUT Local setting change
OUT Chatter ON
OUT Power System fault
OUT Fault Event
OUT Warn: Limit of Memory Data exceeded
OUT Warn: Limit of Memory Parameter exceeded
OUT Warn: Limit of Memory Operation exceeded
OUT Warn: Limit of Memory New exceeded
VI Time from Pickup to drop out
VI Time from Pickup to TRIP
Comments
Functions
2.2 Device
41