Siemens SIPROTEC 7SD80 Manual page 36

Functions
2.1 General
No. Information
184 Error Board 2
185 Error Board 3
186 Error Board 4
187 Error Board 5
190 Error Board 0
191 Error Offset
193 Alarm adjustm.
194 Error neutralCT
320 Warn Mem. Data
321 Warn Mem. Para.
322 Warn Mem. Oper.
323 Warn Mem. New
2054 Emer. mode
32200 PDITestFOon/OFF
32201 PDITestCuon/OFF
32202 PDI Test Mode
32203 PDI Test remote
32224 PDI FO: AGING
32225 PDI Cu: AGING
36
Type of In-
formation
OUT Error Board 2
OUT Error Board 3
OUT Error Board 4
OUT Error Board 5
OUT Error Board 0
OUT Error: Offset
OUT Alarm: Analog input adjustment invalid
OUT Error: Neutral CT different from MLFB
OUT Warn: Limit of Memory Data exceeded
OUT Warn: Limit of Memory Parameter exceeded
OUT Warn: Limit of Memory Operation exceeded
OUT Warn: Limit of Memory New exceeded
OUT Emergency mode
IntSP PDI Test Mode FO ON/OFF
IntSP PDI Test Mode Cu ON/OFF
OUT PDI Test Mode
OUT PDI Test Mode remote
OUT PDI FO: aging (distance damping high)
OUT PDI Cu: aging (distance damping high)
Comments
SIPROTEC, 7SD80, Manual
E50417-G1140-C474-A1, Release date 09.2011