Radio Configuration - Response CENTURION SCOUT Owner's Manual

RADIO CONFIGURATION

The system radio is configured and tested for proper operation during assembly. Only
qualified radio technicians should attempt to configure or modify the radio system.
ALWAYS TEST the radio for proper operation after any changes or modifications.
Undetected errors in radio configuration may disrupt the ability of your system to
broadcast alarms.
 The PTT High setting allows the user to configure the PTT setting to be active high
(selected) or active low (unselected).
 The PTT Hold setting allows the user to configure the PTT setting between Hold PTT to
Transmit (selected) or Release PTT to VOX (unselected).
 The Radio Always Powered setting allows the user to have the radio powered when the
SCOUT is powered (selected) or to only power up during sensor activation notification
(unselected). If this option is unselected a Radio Power Delay should be used.
 The Radio Channel Clear Time setting allows the user to enter the desired time interval
to delay radio transmission should the radio channel be busy.
 The Radio Power Delay setting allows the user to enter the desired time interval to delay
radio transmission to allow the radio to power up completely. This option is only needed
if the radio is not always powered.
www.response-technologies.com - 18 -
Section 5
Console Configuration
©Response Technologies, Ltd.
Revised: January 9, 2015