Paired/Unpaired - Response CENTURION SCOUT Owner's Manual

PAIRED/UNPAIRED

A Bluetooth capable cell phone can be paired to the SCOUT to be used as a sensor activation
output device. The paired device must remain with the SCOUT when being used as an output
device. The device can be plugged into the USB charger located in the radio compartment using
the phone's USB cable in order to maintain a charge on the paired device (see image below). The
default setting will dial the last number dialed by the paired phone and play the user recorded
message. Speed Dial and Phone Number entries are configurable with provided Console
software (see Console Configurations – Section 5).
Device Pairing:
 Press the PAIRED/UNPAIRED
 PAIRED/UNPAIRED LED will blink slowly while waiting for device to be connected.
 Follow the manufacturer's instructions provided with your phone to pair and connect the
device to the SCOUT. The numeric pass-key/code for SCOUT is 1111.
 PAIRED/UNPAIRED LED will blink rapidly when device is successfully paired and
connected and a verbal confirmation will be received.
 When PAIRED/UNPAIRED LED is blinking rapidly the SCOUT will use paired
Bluetooth device as a sensor activation output.
www.response-technologies.com
key to place the SCOUT into pairing mode.
- 10 -
Section 4
System Configuration
Bluetooth
capable cell
phone
©Response Technologies, Ltd.
Revised: January 9, 2015