To View A Single Constellation State - Agilent Technologies 89410A Operator's Manual

To view a single constellation state

In this task you use the marker as a reference to reposition a constellation
state to the center of the screen and zoom in. This task is a continuation
of the previous task.
1.
Turn normalization on, select constellation data format, then pause the
measurement:
Press [
Instrument Mode
Press [ ], [
Data Format
Press [ ].
Pause|Single
2.
Rotate the knob to move the main marker to a constellation point in the upper
right corner.
3.
Reposition the constellation:
Press [ ], [
Shift Marker Function
4.
Rescale and zoom the display:
Press [ ], [
Ref Lvl/Scale
Press [ ] and use the knob to zoom in and out.
Marker|Entry
The marker lets you view and zoom a single constellation state
Analyzing Digitally Demodulated Signals (Options AYA and AYH)
], [ ], [
demodulation setup more
].
polar IQ constellation
].
], .03, [ ].
Y per div enter
], [ ].
normalize on
10 - 5