Agilent Technologies 89410A Operator's Manual page 159

The beginning steps show you how to use the [
(under [
[ code layer]
simply a shortcut that sets [
value. For this shortcut to work, the active trace must be a code-domain
power display.
Notice in this procedure that the vector diagram for the second and third
channels decreases in size. This occurs because power is absolute
(normalization is off) and the power decreases in each channel.
Also notice that there are 16 marker positions in the composite
code-domain power display for each channel in the 120 ksym/s code layer.
This occurs because marker readouts are based on the slowest code layer,
in this case the 7.5 ksym/s layer, and there are sixteen 7.5 ksym/s channels
per 120 ksym/s channel.
Position the marker on the channel of
→],
interest, then press [
Marker
→
[ ] to display the vector
mkr layer/channel
diagram for that channel in the lower
trace. You can use this procedure with
any time-domain display in the lower
trace, including the symbol table/error
summary display.
Diagram for Code Channel C5(8)
Marker →
]). The final step shows you how to use the [
softkeys (under [ ]). In fact, the [
Time
code channel ]
Using Wideband CDMA (Options B73, B79, and 080)
mkr → layer/channel
mkr → layer/channel
] softkey is
and to the current marker
[ code layer]
] softkey
and
code channel ]
13 - 9