Agilent Technologies 89410A Operator's Manual page 109

(Opt. AYH)
6.
Set the center frequency to the computed value:
Press [
Note
If your pilot is on the high (right) side of the spectrum, you must configure the
analyzer to demodulate a high-side pilot. For further details, see the next task:
''To demodulate a VSB signal.''
In this example, the pilot is
on the low (left) side of the
spectrum.
8 VSB Signal With Low-Side Pilot
], [ ], 6 [
center MHz)
Frequency
].
Frequency counter readout. In this
example, this is the frequency of the pilot
signal.
Using Video Demodulation
9 - 5