Agilent Technologies 89410A Operator's Manual page 33

6.
Turn on demodulation (PM) and examine the recovered modulation signal:
Press [
Instrument Mode
[ ], [
demod type
Instrument Mode
Press [
demodulation setup
Press [ ] to scale the display information.
Auto Scale
The display should now appear as shown below.
The PM demodulated spectrum.
7.
Examine the recovered time-domain information:
Press [
Measurement Data
to display the time data.
Press [ ], [
Trigger trigger type
Press [ ] to scale the display information.
Auto Scale
Press [ ], [
Display more display setup
The display should now appear as shown below.
The recovered signal is in radians as a function of time.
], [ ] (with option AYH, press
Analog Demodulation
], [ ], [
Analog Demodulation
], [ ], [ ].
ch1 result PM
main time ch1
], [ ] ([
main time
], [ ] to stabilize the display.
internal source
grids off
], [ ].
Demodulating an Analog Signal
]).
Return
] in a 2-channel analyzer)
1-5