Agilent Technologies 89410A Operator's Manual page 115

Using Video Demodulation
(Opt. AYH)
Hint
You use ] to set demodulation parameters, you use
[demodulation setup
[ ] to select the measurement calculation used on demodulated
Measurement Data
data, and you use [ ] to select a display format (trace coordinates). To
Data Format
learn more about these keys and the choices under them, see online help.
Online help contains detailed descriptions for all keys (press [ ], then press
Help
the desired key). The next task uses [ ] and [ ] to
Data Format
Measurement Data
display a constellation diagram and the error-vector trace.
Two time displays of a demodulated signal: IQ measured versus IQ Reference
9 - 11