Checking The Center Crankcases - SHERCO 250 SEF-R Workshop Manual

Checking the center crankcases

 Inspect the general condition of the center
crankcases for wear and cracks.
Replace the center crankcase if necessary.
 Inspect the condition of all the bearings.
Replace the bearings if necessary.
 Inspect the condition of the crankshaft
bearings.
Replace the
necessary.
 To remove the bearings, install tool number
R464, heat the tool and the bearing.
 Remove the bearing.
ATTENTION : The radial play in the roller
bearings must be practically zero
crankshaft bearings if
31