Front Brake; Checking The Front Brake Fluid Level - SHERCO 125 HRD SM-SE Owner's Manual

CHECKS AND MAINTENANCE

FRONT BRAKE

Checking the front brake fluid level

3
2
WARNING
If the lever becomes too soft there could be an air bubble in the system, if this is the case, immediately contact a SHERCO dealer.
NOTE
(p.70)
Use the DOT 4 fluid listed on
The brake fluid is highly corrosive, do not allow any to drip on the painted parts of the vehicle.
For this operation, use protective gloves.
Keep the brake fluid out of the reach of children.
In case of contact:
- with eyes, rinse immediately with water and seek medical attention.
- with the skin, immediately wash the affected parts with soap and water.
Change clothes immediately If they become contaminated by the brake fluid.
If swallowed, seek medical attention immediately.
Check for the presence of brake fluid through the
1
sight glass
The level should never be below the [MIN] mark on
the sight glass
To restore the level fill the reservoir by removing
the two screws
in the „Recommended Lubricants and Fluids‰ table.
.
1
.
2
.
3
91