Checking The Transmission Components - SHERCO 250 SEF-R Workshop Manual

 Remove the Right side crankcase.
 Remove the crankshaft.
 Remove the counter balancer assembly.
 Remove the shifting fork shafts.
 Remove the gear selector drum.
 Remove the shift forks.
 Remove
the
components.
Checking the
components
 Check the condition of all the gears.
Inspect the engagement dogs [A], look at all
of the gear teeth [B] and the fork shifting
groove on each gear [C].
If any of the parts are damaged or badly
worn they should be replaced.
 Check the condition of all the shifting forks.
Replace the shifting forks if necessary.
 Check the condition of the gear selector
drum, make sure it is not deformed,
damaged or badly worn.
Replace the gear selector drum if necessary.
remaining transmission
transmission
29