MOTOR
For additional details refer to the parts catalog 250 SEF-R _ 300 SEF-R
REMOVING THE CYLINDER HEAD
Remove the spark plug.
Remove the valve cover.
Remove the three valve cover screws.
ATTENTION : These three screws are equipped with o-rings ref: 0900.
Remove the cap from the ignition
cover [A].
Remove the timing control plug [A]
Turn the engine counterclockwise in
order to align the timing marks on
the crankshaft with the marks on the
timing gear. Install the special tool
that locks the engine at Top Dead
Center [A] (ref 1819)
11