Clean Of Injector Body; Replace The Injector Body - SHERCO 250 SEF-R Workshop Manual

Clean of injector body

 Clean the injector body with Net Carbu
 Make sure you clean perfectly the edge of
the mixture throttle on each side by
opening it completely
 Clean the injector Soufflez
 Blow

Replace the injector body

 Put back all the parts together again, put
some connector
electrical connectors (TPS plug, injector
plug)
If you dismount the throttle body
manifold, be careful with the sense of
this part!
 Set the throttle cable
 Disconnect the ECU connector.
Inspect it
 Clean with carbu cleaner or universal
product cleaner
 Blow
 Apply connector grease
 Connect to the ECU
grease inside the
39