Controls Of The Sensors; Control Tps Sensor - SHERCO 250 SEF-R Workshop Manual

CONTROLS OF THE SENSORS

CONTROL TPS SENSOR

1. Remove the injector body from the bike.
2. Control the resistance of the TPS as done below.
3. Values (in kΩ).
Butterfly closed :
Between + (red) and – (black) : 5 +/- 0.5
Between signal (blue) and – (black) : 1.25 à 1.55
Between signal (blue) and + (red) : 5.3 +/- 0.5
Butterfly fully open :
Between + (red) et – (black) : 5 +/- 0.5
Between signal (blue) et – (black) : 4.6 +/- 0.4
Between signal (blue) et + (red) : 2.05 +/- 0.3
TPS
66