Table of Contents
Advertisement
Safety instructions
2.4 Detergent and rinsing agent
2.5 Operation
2.5.1 Hot water
2.5.2 Risk of crushing
2.6 Cleaning the machine
2.6.1 Cleaning with high-pressure washing
2.6.2 Outside the machine
Only detergent and drying agent intended for industrial dishwashing machines
are to be used. Ordinary washing-up liquid must not be used in the machine or for
soaking. Contact your detergent supplier regarding the selection of a suitable de-
tergent.
Be aware of the risk of handling washing and drying agents. Protective gloves and
goggles should be used when handling machine dishwashing detergent. Read
the warning text on the detergent and drying agent containers as well as the reg-
ulations of the detergent supplier.
The temperature of the washing and rinsing water is 60° C and 85° C. If the ma-
chine has a manual hood lift, do not open the hood until the washing and rinsing
phase is finished.
Be careful when closing the hood to avoid crush damage.
The temperature of the water in the tank is approx. 60° C and contains detergent.
Be careful when emptying and cleaning the machine. Use protective gloves.
High-pressure washing must not be used for washing the machine.
In order to satisfy current requirements, electrical components of approved enclo-
sure classes are used. There is no enclosure class capable of withstanding high
pressure.
Pressure washers and hoses must not be used to wash the outside of the ma-
chine. Water can penetrate into the electrical cabinet and the control panel and
damage the equipment, which may affect the safety of the machine.
WD-6C
4
Rev. 3.0 (201305)
Advertisement
Table of Contents
