Table of Contents
Advertisement
Installation
3. Installation
3.1 General information
The machine must be installed by authorised personnel only.
Read these instructions carefully. They contain important information which will
help to ensure that the machine is installed correctly.
The level pipe in the dishwasher has been replaced with a bottom filter.
The instructions should be used in combination with the wiring diagram and flow
diagram for the machine.
The machine is CE marked. The CE mark applies only to the machine in its orig-
inal form. If the machine is damaged as a result of the instructions not being fol-
lowed, the supplier's warranty and product liability is invalidated.
3.2 Requirements for the installation site
3.2.1 Lighting
The installation site must have good general lighting to create the best possible
working conditions for installation, operation, service and maintenance.
3.2.2 Ventilation
The machine produces heat and steam when in operation. In order to ensure the
best possible working conditions, a certain air change rate is required in the dish-
washing room. The ventilation requirements for the room are dimensioned as per
applicable standars.
3.2.3 Drains
There must be a floor drain with an effective trap for the machine's waste water
and for water used for cleaning. The floor drain capacity can be found in the
TECHNICAL SPECIFICATIONS.
3.2.4 Service space
A 1-metre free space should be allowed in front of the machine for service pur-
poses.
WD-6C
6
Rev. 3.0 (201305)
Advertisement
Table of Contents
