How To Check Magma Device - Windows 7 And 8 - Magma Roben-3TX User Manual

How to Check Magma Device - Windows 7 and 8

Open ACPI (BIOS)  Open PCI BusClick the '+' sign several times until your reach a PCI Express Root Port
with a PCI Standard PCI-to-PCI Bridge beneath it.
If the verification is successful, you can install 3rd Party cards as well as auxiliary peripherals, such as hard
drives into the chassis.
If, however, the installation was unsuccessful, you may not see the PCI to PCI Bridge, or it will have a small
yellow symbol in front of it as shown below.
IMPORTANT
Magma requires no driver in Windows Operating System, Unix OS, Linux and other flavor of
Operating Systems.
Screenshot of Windows Device Manager showing Magma Thunderbolt
Expansion device is being recognized / detected
Roben 3 | Chapter 3 Verify Installation
Magma
(No PICe cards installed).
27