BRAKES
REAR CALIPER
Rear Caliper Exploded View
Bleeder Screw
30-60 IN. LBS.
Caliper Body
(4-6.5 NM)
Adjuster Screw
(Finger Tight)
Caliper Removal (4x4)
1.
Safely support the rear of the machine.
Use care when supporting vehicle so that it does
not tip or fall. Severe injury may occur
if machine tips or falls.
2.
Use a wrench to remove the brake line. Place a container
to catch brake fluid draining from brake lines.
9.22
4
CAUTION
Piston
Square
4
O-rings
Dust Boots
3.
After the fluid has drained into the container, remove the
two caliper mounting bolts and remove caliper.
4.
Clean disc, caliper body, and pistons with brake cleaner or
alcohol.
DURING ASSEMBLY
4
Pads
Caliper Mount
4