Polaris RANGER XP 700 4X4 Service Manual page 228

FINAL DRIVE
9. Inspect the shift yoke (H), shift lever (J), and shift lever
return spring (K).
K
10. Remove the set screw.
11. Remove the shift yoke pivot shaft (L) Use a 1/4 in.- 20
coarse thread bolt approximately 3 in. long to thread into
the pivot shaft.
L
7.48
J
H
12. Thread the bolt into the shift yoke pivot shaft (L).
13. Carefully pull the shift yoke pivot shaft (L) out of the carrier
cover.
L
14. Remove the shift lever (M) and springs (N) from the shift
yoke (H). Inspect the components for wear and replace as
needed.
M
N
H