Parking Brake Caliper Service; Exploded View; Caliper Removal - Polaris RANGER XP 700 4X4 Service Manual

BRAKES

PARKING BRAKE CALIPER SERVICE

Exploded View

Pad & Holder
18 ft. lbs.
(24 Nm)
Sleeve
Hex Head
Mount Bolt
Nut

Caliper Removal

NOTE: Do no get oil, grease, or fluid on the park
brake pads. Damage to or contamination of the pads
may cause the pads to function improperly.
1. Remove the clip pin and pin (A) from the park brake cable.
4x4 Model Shown
A
NOTE: Be sure the park brake is not engaged.
9.10
Pad & Holder
Thrust Washer
Compression Spring
Shim Pack
Lever
(4 Shims)
Spring Pin
2. If replacing the brake pads, slightly loosen the caliper
assembly bolts before removing the complete caliper
assembly. This will ease the caliper disassembly procedure
later.
4x4 Model Shown
Plain Washer
Asm. Bolt
25 ft. lbs.
(34 Nm)
Stationary Actuator
Steel Balls (3)
Hex Nut
Figure 9.10