Seagull Models CLASSIC UGLY STICK Assembly Manual page 7

AILERON PUSHROD HORN
INSTALLATION.
Please see below pictures.
Use a felt tip pen to mark the wire where
it crosses the hole. Use a pair of pliers to
put a shrp 90-degree bend in the wire at
the mark.
Bend at the mark
M2 lock nut.
8mm
Snap keeper.
WWW.SEAGULLMODELS.COM
Mark.
Metal clevis.
Servo arm.
Snap keeper.
Hex Nut.
ATTACHMENT WING- FUSELAGE.
Please see below pictures.
Nylon Snap keeper.
Fuel tubing.
7