Wall Tamper (Option) - Optex HX-40 Installation Instructions Manual

2-5

WALL TAMPER (OPTION)

Universal magnet switch may be mounted as a wall tamper.
Installation space for universal magnet switch is provided on the back of the main unit and the
bracket.
Maximum size of an applicable universal magnet switch: D 9 mm (0.35'') × W 40 mm (1.57'') × H 9
mm (0.35'').
Universal magnet switch on the market assist is not included.
Main unit
-Installation
Install the universal magnet switch (wall
1
side) to the wall. To determine the install
position, use the "Install position template"
provided on the inside cover of the product
package.
Install the other portion of the universal magnet switch to the back of the main unit or the
3
bracket. Pull the wiring through the knockouts.
When not using the bracket
2
In
4
Wiring sponge pad
HX-40DAM_EN.indd 11 HX-40DAM_EN.indd 11
Magnet switch (Wall side)
installation position
Magnet switch (Base side) installation position
1
Fix
3
Out
- 11 -
Bracket
Wiring Hole
Magnet switch
(Bracket side)
installation position
Magnet switch (Wall side)
installation position
Open the wiring knockout with suitable
2
tool e.g. screwdriver.
2010/06/24 14:12:02 2010/06/24 14:12:02