Installation
2
2-1.
Ceiling/Wall
mount
Accessories
used in this installation
Retaining spring x 2
2
Make a ø45 mm (1.77") hole in the ceiling for mounting.
ø45 mm
(1.77")
3
Insert the detector into the hole so that the retaining springs come first.
Ceiling mount
NOTE
Be sure to arrange the wires with a downward slope to prevent
water igress into the detector.
without switch box
1
Install a retaining spring on both sides.
(follow the illustrated arrow steps to complete the assembly of
the retaining spring.)
Horizontal
Wall mount
5
2
3
1
Vertical