Figure 11: Wlan Global Configuration - D-Link DWC-1000 User Manual

Wireless Controller
Disabling the WLAN controller does not affect non-WLAN features on the
controller, such as VLAN or STP functionality.
WLAN Controller Operational Status: Shows the operational status of the
controller
. The status can be one of the following values:
• Enabled
• Enable-Pending
• Disabled
• Disable-Pending

Figure 11: WLAN global configuration

IP Address: This field shows the IP address of the WLAN interface on the
controller. If the controller does not have the Routing Package installed, or if
routing is disabled, the IP address is the network interface. If the routing package is
26
User Manual