Upgrading Wirelesss Controller Firmware; Figure 116: Restoring Configuration From A Saved File Will Result In The Current Configuration Being Overwritten And A Reboot - D-Link DWC-1000 User Manual

Wireless Controller
9.
To restore your saved settings from a backup file, click Browse then locate the file on the
host. After clicking Restore, the controller begins importing the file's saved configuration
settings. After the restore, the controller reboots automatically with the restored settings.
10.
To erase your current settings and revert to factory default settings, click the Default
button. The controller will then restore configuration settings to factory defaults and will
reboot automatically. (See Appendix B for the factory default parameters for the
controller).
Figure 116: Restoring configuration from a saved file will result in the
current configuration being overwritten and a reboot

9.7 Upgrading wirelesss controller Firmware

Tools > Firmware
You can upgrade to a newer software version from the Administration web page. In
the Firmware Upgrade section, to upgrade your firmware, click Browse, locate and
select the firmware image on your host, and click Upgrade. After the new firmware
image is validated, the new image is written to flash, and the controller is
automatically rebooted with the new firmware. The Firmware Information and also
Status > Device Info > Device Status
the
version.
page will reflect the new firmware
173
User Manual