D-Link DWC-1000 User Manual page 130

Wireless Controller

Port: The port number on which openvpn server(or Access Server) runs.

Tunnel Protocol: The protocol used to communicate with the remote host.
Ex: Tcp, Udp. Udp is the default.

Encryption Algorithm: The cipher with which the packets are encrypted. Ex:
BF-CBC, AES-128,AES-192 and AES-256. BF-CBC is the default

Hash algorithm: Message digest algorithm used to authenticate packets. Ex:
SHA1, SHA256 and SHA512. SHA1 is the default.

Tunnel Type: Select Full Tunnel to redirect all the traffic through the
tunnel. Select Split Tunnel to redirect traffic to only specified resources
(added from openVpnClient Routes) through the tunnel. Full Tunnel is the
default.

Enable Client to Client communication: Enable this to allow openvpn clients
to communicate with each other in split tunnel case. Disabled by default.

Upload Access Server Client Configuration: The user has to download the
auto login profile and upload here to connect this controller to the OpenVPN
Access Server.

Certificates: Select the set of certificates openvpn server uses. First Row:
Set of certificates and keys the server uses. Second Row: Set of certificates
and keys newly uploaded.

Enable Tls Authentication Key: Enabling this adds Tls authentication which
adds an additional layer of authentication. Can be checked only when the tls
key is uploaded. Disabled by default.
Click Save Settings to save the settings.
129
User Manual