Figure 48: Detected Client Status - D-Link DWC-1000 User Manual

Wireless Controller
Client Name: Shows the name of the client, if available, from the Known Client
Database. If client is not in the database then the field is blank.
Client Status: Shows the client status, which can be one of the following:
• Authenticated— The wireless client is authenticated with the wireless system.
• Detected— The wireless client is detected by the wireless system but is not a
security threat.
• Black-Listed— The client with this MAC address is specifically denied access via
MAC Authentication.
• Rogue— The client is classified as a threat by one of the threat detection
algorithms.
Age: Time since any event has been received for this client that updated the
detected client database entry.
Create Time: Time since this entry was first added to the detected client's
database.

Figure 48: Detected Client Status

This page includes the following buttons:
• Delete —Delete the selected client from the list. If the client is detected again, it
will be added to the list.
• Delete All —Deletes all non-authenticated clients from the Detected Client
database. As clients are detected, they are added to the database and appear in the
list.
79
User Manual