Chapter 9. Administration & Management; Remote Management; Cli Access; Figure 107: Remote Management - D-Link DWC-1000 User Manual

Wireless Controller
Chapter 9. Administration &
Management

9.1 Remote Management

Both HTTPS and telnet access can be restricted to a subset of IP addresses. The
controller administrator can define a known PC, single IP address or range of IP
addresses that are allowed to access the GUI with HTTPS. The opened port for SSL
traffic can be changed from the default of 443 at the same time as defining the
allowed remote management IP address range.

Figure 107: Remote Management

9.2 CLI Access

In addition to the web-based GUI, the gateway supports SSH and Telnet
management for command-line interaction. The CLI login credentials are shared
with the GUI for administrator users. To access the CLI, type ―cli‖ in the SSH or
console prompt and login with administrator user credentials.
161
User Manual