Openvpn Support; Figure 85: L2Tp Tunnel Configuration - L2Tp Server - D-Link DWC-1000 User Manual

Wireless Controller
Figure 85: L2TP tunnel configuration – L2TP Server

6.4.3 OpenVPN Support

Setup > VPN Settings > OpenVPN > OpenVPN Configuration
OpenVPN allows peers to authenticate each other using a pre -shared secret key,
certificates, or username/password. When used in a multiclient -server configuration,
it allows the server to release an authentication certificate for every client, using
signature and Certificate authority. An Open VPN can be established through this
controller. Check/Uncheck this and click save settings to start/stop openvpn server.

Mode: OpenVPN daemon mode. It can run in server mode, client mode or
access server client mode. In access server client mode, the user has to
download the auto login profile from the Openvpn Access Server and upload
the same to connect.

Server
connects(Applicable in client mode).

Vpn Network: Address of the Virtual Network.

Vpn Netmask: Netmask of the Virtual Network.
IP: OpenVPN server
128
IP address to which
User Manual
the client