Figure 12: Configuring The Wireless Discovery - D-Link DWC-1000 User Manual

Wireless Controller

Figure 12: Configuring the Wireless Discovery


L2/VLAN Discovery: The D-Link Wireless Device Discovery Protocol is a
good discovery method to use if the controller and APs are located in the same
Layer 2 multicast domain. The wireless controller periodically sends a
multicast packet containing the discovery message on each VLAN enabled for
discovery
This page includes the following buttons:
• Add—Adds the data in the IP Address or VLAN field to the appropriate list.
• Delete—Deletes the selected entry from the IP or VLAN list.
29
User Manual