Dynamic Dns Setup; Figure 117: Firmware Version Information And Upgrade Option - D-Link DWC-1000 User Manual

Wireless Controller

IMPORTANT! During firmware upgrade, do NOT try to go online , turn off the
DWC-1000, shut down the PC, or interrupt the process in anyway until the
operation is complete. This should take only a minute or so including the reboot
process. Interrupting the upgrade process at specific points when the flash is being
written to may corrupt the flash memory and render the controller unusable without
a low-level process of restoring the flash firmware (not through the web GUI).

Figure 117: Firmware version information and upgrade option

This controller also supports an automated notification to determine if a newer
firmware version is available for this controller. By clicking the Check Now button in
the notification section, the controller will check a D-Link server to see if a newer
firmware version for this controller is available for download and update the Status
field below.

9.8 Dynamic DNS Setup

Tools > Dynamic DNS
Dynamic DNS (DDNS) is an Internet service that allows controller with varying
public IP addresses to be located using Internet doma in names. To use DDNS, you
must setup an account with a DDNS provider such as DynDNS.org, D -Link DDNS, or
Oray.net.
Each configured WAN can have a different DDNS service if required. Once
configured, the controller will update DDNS services changes in the WAN IP address
so that features that are dependent on accessing the controller WAN via FQDN will be
174
User Manual