Vpn Wizard; Figure 78: Vpn Wizard Launch Screen - D-Link DWC-1000 User Manual

Wireless Controller

6.1 VPN Wizard

Setup > Wizard > VPN Wizard
You can use the VPN wizard to quickly create both IKE and VPN policies. Onc e the
IKE or VPN policy is created, you can modify it as required.

Figure 78: VPN Wizard launch screen

To easily establish a VPN tunnel using VPN Wizard, follow the steps below:
1.
Select the VPN tunnel type to create

The tunnel can either be a gateway to gateway connection (site -to-site) or a tunnel
to a host on the internet (remote access).

Set the Connection Name and pre -shared key: the connection name is used for
management, and the pre-shared key will be required on the VPN client or gateway
to establish the tunnel

Determine the local gateway for this tunnel; if there is more than 1 WAN
configured the tunnel can be configured for either of the gateways.
119
User Manual