Creating Portal Layouts; Figure 101: Configured Client Routes Only Apply In Split Tunnel Mode - D-Link DWC-1000 User Manual

Wireless Controller
Setup > VPN Settings > SSL VPN Client > Configured Client Routes
If the SSL VPN client is assigned an IP addr ess in a different subnet than the
corporate network, a client route must be added to allow access to the private LAN
through the VPN tunnel. As well a static route on the private LAN's firewall
(typically this controller) is needed to forward private traffic through the VPN
Firewall to the remote SSL VPN client. When split tunnel mode is enabled, the user is
required to configure routes for VPN tunnel clients:
 Destination network: The network address of the LAN or the subnet
information of the destination network from the VPN tunnel clients'
perspective is set here.
 Subnet mask: The subnet information of the destination network is set here.

Figure 101: Configured client routes only apply in split tunnel mode

7.4.1 Creating Portal Layouts

Setup > VPN Settings > SSL VPN Server > Portal Layouts
The controller allows you to create a custom page for remote SSL VPN users that is
presented upon authentication. There are various fields in the portal that are
customizable for the domain, and this allows the controller administrator to
communicate details such as login instructions, available services, and other usage
details in the portal visible to remote users. During domain setup, configured portal
layouts are available to select for all user s authenticated by the domain.

The default
bin/userPortal/portal.
link is clicked on the SSL VPN menu of the controller GUI.
portal LAN IP address
This is the same page that opens when the ―User Portal‖
148
https://192.168.10.1/scgi-
is
User Manual